Part 70 Manufacturing General Permit: Documents and forms

This general permit was issued in January 2020. Here are reference copies of the permit and the technical support document, along with forms for application and compliance.

Because of the permit length, and because all of the permit content is unlikely to apply to your facility, a link to a Word document is available that you can download, edit, and use as a tool for compliance. You could use this document by deleting sections that you know do not apply to you, to make it easier to follow the requirements that do apply. Note that this is not your official permit. If you make any changes to your facility and think that other portions of the permit might apply, then you must refer to the official (entire) document.


Application and compliance forms

Form number Name
MG-00 File Qualifications review list (aq-f4-mg00)
 MG-HB File Handbook and application instructions (aq-f4-mghb)
MG-CK File Application requirements (aq-f4-mgck)
 MG-master File Application forms master list (aq-f4-mgmaster)
MG-01 File Facility information (aq-f4-mg01)
MG-02 File Process flow diagram (aq-f4-mg02)
MG-03 File Building information and stack/vent diagram (aq-f4-mg03)
MG-04 File Facility stack/vent information (aq-f4-mg04)
MG-05A1

File Pollution control equipment information for fabric filters (aq-f4-mg05a1)

MG-05A2 File Pollution control equipment information for wall or panel filters (aq-f4-mg05a2)
MG-05A3 File Pollution control equipment information for catalytic oxidizers (aq-f4-mg05a3)
MG-05A4 File Pollution control equipment information for thermal oxidizers (aq-f4-mg05a4)
MG-05B1 File Emission unit information for boilers (aq-f4-mg05b1)
MG-05B2 File Emission unit information for ovens (aq-f4-mg05b2)
MG-05B3 File Emission unit information for furnaces (aq-f4-mg05b3)
MG-05B4 File Emission unit information for stationary internal combustion engines (aq-f4-mg05b4)
MG-05B5 File Emission unit information for booths: Abrasive blasting and/or sanding (aq-f4-mg05b5)
MG-05B6 File Emission unit information for booths: Spraying/coating (non fiberglassing) (aq-f4-mg05b6)
MG-05B7 File Emission unit Information for fiberglass operations (spraying/coating, molding, casting, lamination) (aq-f4-mg05b7)
MG-05B8 File Emission unit information for dip tanks (aq-f4-mg05b8)
MG-05B9 File Emission unit information for cleaning machines (degreasers) (aq-f4-mg05b9)
MG-05C File Tank information (aq-f4-05c)
MG-05D File Fugitive emission source information (aq-f4-mg05d)
MG-05F File Emissions source associations (aq-f4-mg05f)
MG-07 File Facility emissions summary (aq-f4-mg07)
MG-09 File Facility applicable requirements (aq-f4-mg09)
MG-09A File Requirements: NESHAP for source categories (40 CFR pt. 63) (aq-f4-mg09a)
MG-09B File Requirements: NESHAP (40 CFR pt. 61) (aq-f4-mg09b)
MG-09C File Requirements: New source review (40 CFR § 52.21) (aq-f4-mg09c)
MG-09D File Requirements: NSPS (40 CFR pt. 60) (aq-f4-mg09d)
MG-09E File Requirements: Acid rain (40 CFR pt. 72) (aq-f4-mg09e)
MG-09F File Requirements: Stratospheric ozone protection (40 CFR pt. 82) (aq-f4-mg09f)
MG-09G File Requirements: Risk management plan for accidental chemical release prevention (40 CFR pt. 68) (aq-f4-mg09g)
MG-09H File Requirements: Compliance assurance monitoring (40 CFR pt. 64) (aq-f4-mg09h)
MG-09I File Requirements: State rules (aq-f4-mg09i)
MG-06 File Qualifications compliance certification (aq-f4-mg06)
MG-CD05 File Compliance plan for control equipment (aq-f4-mgcd05)
MG-EIL File Annual equipment inventory list (aq-f4-mgeil)
MG-CR02 File Hood evaluation and certification (aq-f4-mgcr02)
MG-CR04 Microsoft Office document icon Annual compliance certification report (aq-f4-mgcr04)
MG-IA01 File Insignificant activities list (aq-f4-mgia01)
 MG-CMP File Compliance management plan (aq-f4-mgcmp)
 SCP-01 File Submittal cover page (aq-f1-scp01)