Air Emissions Inventory — Electronic Reporting

Go to the e-Services electronic reporting web page to review/revise your air emission inventory electronically. 

Note: If you are having trouble accessing the e-Services electronic reporting web page, please check your computer/network security settings to ensure that the settings are not blocking access to the e-Services site. If after checking/ adjusting the security settings you are still unable to access the web page, please email e-Services Support.

Instructions for using e-Services

Setting up a user account and Responsible Official/Submitter registration. If your facility holds a registration Option C, Option D, or a Large Inventory Type Permit, you will submit your 2011 Emission Inventory (EI) electronically. (Facilities holding a registration Option B, or a nonmetallic general permit will submit their inventories by hardcopy mailing as in previous years.)

To be able to use the system, the Responsible Official/Submitter for your facility, as defined in Minn. R. 7007.0100, subp. 21 must sign up for an account through the e-Services electronic reporting website and submit a signed paper Emission Inventory Report (EIR) User Agreement (Submittal Agreement) to the MPCA. According to Minn. Rules, the Responsible Official/Submitter is the only person that can submit the inventory, thus a signed paper agreement is needed to allow for electronic signature and submittal. Please allow up to 2-3 weeks to process this agreement given the volume of new users.

Others assisting the Responsible Official/Submitter with the preparation of the inventory (Preparers) can create an account at any time through the e-Services electronic reporting website by following the steps under "Create User Account" below. Preparers will be able to assist with preparing the emission inventory submittal; however, they will not have access to the facility information until access is granted by the Responsible Official/Submitter.

Create User Account (Preparers and Responsible Officials)

1. Go to e-Services web page. 
2. Select "Create an Account" and complete the information requested. You will receive an e-mail with your account number. Click the link in the e-mail to activate your account.

Apply for Responsible Official/Submitter Designation (Responsible Officials/Submitters Only)

1. Go to e-Services web page. 
2. Select "Login" and enter the "Account Number" and "Password" that you obtained during the "Create User Account" procedure.
3. Select "Air Emission Inventory Submittal-CEDR" from the menu of options.
4. Select "Create Submittal Agreement."
5. Enter the 8 digit facility ID (permit number) for the facility for which you are the Responsible Official/Submitter. This ID appears on your previous year's air emission inventory.
6. Select "Create Submittal Agreement."
7. Print out the Agreement, complete, sign, and mail to the MPCA address listed.
8. You will be contacted by e-mail when you are authorized as the Responsible Official/Submitter for the facility listed in the agreement and to grant access to others to prepare the inventory.

Note: If the Responsible Official/Submitter needs to be changed at your facility simply have the person who will be the Responsible Official/Submitter complete steps 1-8 above to "Apply for Responsible Official/Submitter Designation."

Grant Preparer Role (Responsible Official/Submitter Only)

If you had previously registered as the Responsible Official/Submitter for a facility(ies) you can still add/remove Preparers for these facility(ies) by following these instructions.

1. Go to MPCA e-Services web page.  
2. Select “Login” and enter the “Account Number” and “Password.”
3. Select “Air Emission Inventory Submittal-CEDR.”
4. Select: “Grant Preparer Role.”
5. Select the “Facility ID” number that you want. 
6. Enter the “Preparer’s Account Number” and the "Preparer's Email" for those people that will assist with preparation of the emission inventory submittal

Electronic Reporting Training and Guidance

• Option C Registration Permittees
  • Help Document for 2011 Air Emission Inventory — C, D, and Large Facilities (aq-ei1-03) This is a User Guide for facilities that will be using the MPCA e-Services electronic reporting website to report annual air emissions. This guide provides instructions and answers questions pertaining to account creation, Responsible Official/Submitter registration, and additional administrative functions. (date prepared: 2/7/12)
  • Help Document for Air Emission Inventory — Registration Option C Permit (aq-ei1-04) This is a User Guide for facilities with registration Option C permits that will be using the MPCA e-Services electronic reporting website to report annual air emissions. This guide provides instructions and answers questions specific to Option C facilities. (date prepared: 1/12/12)
  • Electronic Reporting Tutorial — Registration Option C Permit Holders (23 minutes) A webinar that highlights the features of the electronic reporting system and includes a demonstration of the submittal process for Registration Option C Permit holders. (Date recorded 2/8/12) (Note: this is a recorded WebEx session. The link will open in a separate browser.)
• Option D Registration Permittees
  • Help Document for 2011 Air Emission Inventory — C, D, and Large Facilities (aq-ei1-03)   This is a User Guide for facilities that will be using the MPCA e-Services electronic reporting website to report annual air emissions. This guide provides instructions and answers questions pertaining to account creation, Responsible Official/Submitter registration, and additional administrative functions. (date prepared: 2/7/12)
  • Help Document for Air Emission Inventory — Registration Option D Permit (aq-ei1-05)   This is a User Guide for facilities with registration Option D permits that will be using the MPCA e-Services electronic reporting website to report annual air emissions. This guide provides instructions and answers questions specific to Option D facilities. (date prepared: 1/12/12)
  • Electronic Reporting Tutorial — Registration Option D Permit Holders (31 minutes) A webinar that highlights the features of the electronic reporting system and includes a demonstration of the submittal process for Registration Option D Permit holders. (Date recorded 2/10/12) (Note: this is a recorded WebEx session. The link will open in a separate browser.)
• Large Inventory Type Permit Holders
  
  • Help Document for 2011 Air Emission Inventory — C, D, and Large Facilities (aq-ei1-03) This is a User Guide for facilities that will be using the MPCA e-Services electronic reporting website to report annual air emissions. This guide provides instructions and answers questions pertaining to account creation, Responsible Official/Submitter registration, and additional administrative functions. (date prepared: 2/7/12)
  • Help Document for Air Emission Inventory — Large EI type (aq-ei1-06)   This is a User Guide for facilities with Large Inventory Type Permits that will be using the MPCA e-Services electronic reporting website to report annual air emissions. This guide provides instructions and answers questions specific to Large Inventory Type Permit holders. (date prepared: 1/12/12)
  • Electronic Reporting Tutorial — Large Inventory Type Permit Holders (57 minutes) A webinar that highlights the features of the electronic reporting system and includes a demonstration of the submittal process for Large Inventory Type Permit holders. (Date recorded 2/7/12) (Note: this is a recorded WebEx session.  The link will open in a separate browser) 
  • Electronic Reporting Tutorial — Large Inventory Type Permit Holders — Adding Units. (17 minutes)  This webinar demonstrates how to add new emission units, processes, control equipment, and stacks and how to a make associations between equipment. (date recorded 3/10/11)  (Note: this is a recorded WebEx session.  The link will open in a separate browser)

PM Emission Factor Updates from EPA for Natural Gas, Process Gas, and LPG

Particulate matter emission factors for natural gas, process gas, and LPG have been revised by Roy Huntley of the EPA. The reason for this adjustment is that the EPA believes that the current AP-42 factors for condensable PM emissions are too high. The electronic emission inventory reporting website (e-Services) will perform calculations using the revised EPA emission factors from Roy Huntley as the default emission factors. The unrevised emission factors will still be available in AP-42/WebFIRE. Please select the link below based on your facility’s air permit type to reference the updated emission factors. An explanation of this issue can be found on the EPA’s National Emission Inventory (NEI) website.

• Option C and Option D registration permittees revised natural gas, process gas, and LPG emission factors
  • Revised PM Emission Factors-Nat. Gas Combustion — Small EI Type (aq-ei1-08)
• Large Inventory Type Permit holders revised natural gas, process gas, and LPG emission factors
  • Revised PM Emission Factors-Nat. Gas Combustion-Large EI Type (aq-ei1-07)