Skip to main content
Image
Orange sparks fly as a person wearing goggles cuts through a piece of metal.

Air emissions

Metal fabrication and finishing businesses perform work regulated by federal and state air regulations, including welding, shot or sand blasting, and painting and coating.

State

If abrasive blasting activity is part of your manufacturing or processing, you may need to follow the industrial process equipment rule. For example, blasting may need to be performed in a room or booth where the air is filtered. Use the abrasive blasting calculator to see what is required of your business. The MPCA requires facilities to prevent dust from becoming airborne; airborne dust is a nuisance and a health concern.

Some metal fabrication and finishing operations at your business may not be significant sources of air emissions. When evaluating your air emissions, check the insignificant activities rule to see if your equipment or activities are listed.

In addition to mechanical finishing, businesses using paints, stains, solvents, or other volatile organic compound (VOC) containing materials may need an air permit based on the amount that is used. Using less than 1,000 gallons per year may be considered a conditionally insignificant activity. Using less than 2,000 gallons per year may qualify to operate without a permit by following certain technical standards or apply for a registration option B air permit. If your business uses more than 2,000 gallons of VOC-materials, has a higher air emission potential, or has other activities that emit air pollutants, you may qualify for the Registration Option D permit.

Complying with state permits

Air permit due dates

RequirementDue date
Emission inventory fee for previous reporting yearMailed to permit holders between February and April, due within 30 days
Emission inventory reportApril 1
Emission summary review periodBegins in August/September

Federal

Regardless if your business has an air permit, you may need to meet the requirements of National Emission Standards for Hazardous Air Pollutants (NESHAP)

The Metal Fabrication and Finishing Source Categories (6X) NESHAP focuses on blasting, machining, grinding, painting, and welding activities that release specific metal hazardous air pollutants.

If this standard applies, submitDue date
Initial notification and first certification of compliance (see compliance section)120 days after startup
Annual certification of complianceJanuary 31

The Paint Stripping and Miscellaneous Surface Coating Operations (6H) NESHAP affects facilities that spray paint onto metal, wood, or plastic or use methylene chloride to remove paint. Paints and solvents contain VOCs and hazardous air pollutants. If this standard applies, submit the notification and compliance form within 180 day after startup.

The Surface Coating of Miscellaneous Metal Parts and Products (4M) NESHAP affects larger facilities that spray paint onto or coat miscellaneous metal parts. If you have a registration air permit, the 4M NESHAP does not apply to you.

Hazardous waste

You need a hazardous waste identification number if your business produces any amount of hazardous waste.

Businesses generating most types of hazardous waste are required to report annually, pay a fee, and obtain a license for the subsequent year. Facilities in Anoka, Carver, Dakota, Hennepin, Ramsey, Scott, or Washington County are licensed and inspected by their county. Facilities in greater Minnesota are licensed and inspected by the MPCA. If you produce only small amounts of hazardous waste, you probably qualify as a very small quality generator:

Annual hazardous waste training is required for businesses that generate 220 pounds or more of hazardous waste a month. Learn more: Hazardous waste. See the hazardous waste identification and management page for information on managing specific hazardous wastes, such as aerosols, sandblasting and power washing wastes, oil, solvents, paint booth filters, scrap metal, fluorescent lights, and towels and rags

Hazardous waste due dates

RequirementDue date
Hazardous waste generators feeMailed to license holders in first quarter, due date on invoice
License applicationDue August 15 for Greater Minnesota businesses;
Twin Cities metro businesses, contact your county

Stormwater

Apply for an industrial stormwater permit if you have material, equipment, or activities that are exposed to rain, snow, or runoff. You may qualify for the no-cost no-exposure certification and avoid the permit and fees if you don’t have any materials, equipment, or activities exposed to the elements. If you have only a few materials outside, consider moving them inside to qualify for no-exposure certification. Learn about stormwater pollution prevention ideas for metal fabricators and finishers:

Stormwater permit due dates.

RequirementDue date
Industrial stormwater general permit annual reportingMarch 31
Industrial stormwater general permit quarterly samplingJanuary 21, April 21, July 21, and October 21

Local regulation

Be sure to check with your county, city, and township to see if they have any additional requirements.

Beyond compliance

Create a floor management plan to help you inspect and maintain floors to help prevent the release of hazardous materials.

MnTAP offers many ideas and personalized assistance for reducing wastes and saving energy at metal fabricating and finishing facilities.