Advanced Citizen Lake Monitoring Program (CLMP+)
Thank you for your interest in the Advanced Citizen Lake Monitoring Program! We have received all applications that we can support for 2013. Please check back in fall 2013 for the next application round.
A volunteer uses the integrated sampler to collect water for phosphorus and chlorophyll samples.
A volunteer uses a Secchi disk to test water transparency.
Minnesota’s Citizen Lake Monitoring Program (CLMP) has been providing volunteers with Secchi disks to measure the clarity (transparency) of Minnesota’s lakes since 1973.
The Advanced Citizen Lake Monitoring Program (CLMP+) was developed in 2000 and expands the basic CLMP to include additional monitoring parameters for lakes where no advanced monitoring program exists, including temperature and dissolved oxygen profiles, alkalinity, chloride, chlorophyll, color, nitrogen, phosphorus, and solids.
The CLMP+ is designed to increase volunteers’ understanding and awareness of their lakes and to assist the MPCA in assessing the chemical, physical and biological integrity of lakes to determine if designated uses are being met.
The CLMP+ is not a diagnostic study - it will not reveal sources and concentrations of phosphorus loading coming from the watershed. The CLMP+ also does not measure toxic chemicals, metals (e.g. mercury) or bacteria.
Participants in the CLMP+ will be trained by MPCA staff in proper monitoring and sample collection techniques. Volunteers are required to provide a boat, and will perform monitoring activities from May through September, complete necessary paperwork, and ship samples for laboratory analysis.
The MPCA will provide all necessary monitoring equipment and will pay shipping and laboratory analysis fees. The MPCA will enter all data collected into the statewide water quality database and compile a report summarizing the data.Advanced Citizen Lake Monitoring Program (CLMP+) Work Plan
Lakes eligible for participation in the CLMP+ are those that lack sufficient data to determine whether the lake meets water quality standards for aquatic recreational use by the MPCA. (Note: To be assessed, a lake must have at least eight phosphorus, chlorophyll, and Secchi measurements collected over at least two years). In addition, priority will be given to lakes that:
- Are less than 500 acres in size (the MPCA will be monitoring lakes over 500 acres)
- Have a public access, public beach or public right of way
- Are in the same region as other participating lakes
In order to be considered for participation in the CLMP+, at least two individuals on a lake must commit to participate in the program for one (1) or two (2) seasons as deemed necessary by the MPCA. Volunteers must also:
- Have participated in CLMP for at least two years (at least one of the two applicants)
- Have a boat or canoe to perform monitoring activities
The MPCA has the resources to work with approximately 10 CLMP+ lakes in any given season. In the instance that demand exceeds these resources, lakes may be wait-listed for participation in future years.
To be considered as a volunteer for an upcoming monitoring season, please submit your application by January 31 of the same year you wish to begin the Advanced Citizen Lake Monitoring Program. (Applications submitted after January 31 may be considered for the monitoring season as resources allow. If not included in the upcoming monitoring season, these applications will be considered for future monitoring seasons.)
If you are interested in participating in the CLMP+, please fill out the application form and submit to MPCA by e-mail (email@example.com.) or regular postal mail to address below
Minnesota Pollution Control Agency
520 Lafayette Road N
St. Paul, MN 55155-4194
If you have questions about the program, you can reach Citizen Lake Monitoring Program staff at 651-296-6300 (Twin Cities) or 1-800-657-3864 (Greater Minnesota) or by e-mail at firstname.lastname@example.org.